Benefits of LED Lights Over Halogen Lights

At present, LED lights and halogen lights are very popular among consumers. Both of them can efficiently light up a room and accentuate the beauty of a garden. Halogen bulbs contain halogen gas that allows it to produce about thirty percent more light than a regular bulb that uses the same amount of power. LED bulbs, on the other hand, produce light by running an electric current between two electrodes.

LED lights are tiny electronic lights that are ideal for home use and commercial use. You can use them on downlights, kitchen lights, lamps, and garden lights. They can also be used in malls and even on traffic lights. They can last much longer than halogen lights. While halogen bulbs can typically last for two thousand hours to four thousand hours, LED bulbs can last for twenty-five thousand hours to eighty thousand hours.
This means that halogen light bulbs can only be used for months but LED light bulbs can actually last for years and even decades. So, you will be able to avoid frequent light replacements and save more money. In addition, LED bulbs are energy-efficient. They do not use as much power as regular bulbs. For instance, a regular bulb may use one hundred watts but an equivalent LED bulb will only use fifteen to twenty watts.

You can actually save hundreds, if not thousands of dollars every year just by replacing all your light bulbs with LED bulbs. Use LED on your living room, kitchen, bedroom, and porch. Use them on your downlights to brighten up every room in your house. These lights are brighter than halogen and incandescent lights, so you will not have any problem with them; and not like halogen lights, they are cool to the touch.

Your hand will not hurt if you touch a LED light bulb that has been turned on for several hours already. On the contrary, halogen light bulbs are hot to the touch. Halogen downlights and outdoor lights may even cause fire if not turned off after a certain period time. In addition, LED lights come in a variety of colors. Thus, they will make great Christmas lights. They will also look amazing in your garden, wrapped around trees and shrubs.
Nonetheless, you may also LED lights on camping and hunting trips. Aside from downlights, lamps, and indoor lighting fixtures, you may also use them on flashlights and emergency lights. They will prove to be handy during your nights in the wild.


What is LED?

LED lighting has changed our world in many ways and you may be surprised with how often you actually use LEDs. One of the biggest reasons that LED lighting has grown in popularity is because of its energy saving ability.  Not only have many homes made the change to LED, but businesses of all sizes also have realized the money saving potential with LEDs.

It does not matter if you are a large franchise or just a small ma and pa shop, the cost of electricity can be very overwhelming for the owners.  The introduction of LED lighting into the world of business has offered a valuable money saving tool that is being used more and more every day.

Some of the most common lighting that you will find in a business is overhead florescent lighting, if you have not yet made the upgrade to LED, this is more than likely where you are losing the most in energy costs.  Oftentimes you may hear home and business owners complain about their electric bill, especially in the summer and blame it on the air conditioner.  Of course the bill is going to rise in the summer, but it does not need to be as much as it is currently.  Florescent lighting not only costs more to operate than the average air conditioner, but also releases unwanted heat into your building; with LED, you can solve both of those problems.

LED lighting takes less energy to operate than other lighting options that are on the market, which will help your budget in a few ways.  Less energy means less watts and less electricity that is wasted when your lights are on.  If you have ever changed a light bulb, you more than likely have realized that traditional bulbs become very hot, very quickly.  LED bulbs do not because of the energy they are consuming, meaning that less heat is produced, meaning that your building stays at its desired temperature longer.

If a lower electric bill is not enough to make you want to change all your lighting in your business to LED lighting, then is may be time for you to calculate all the money you are wasting each month on new bulbs. Bulbs are only meant to last for so many hours, but when you have a business you are constantly using them during those hours.  With LED bulbs, their usable life is longer, meaning that you won’t have to buy light bulbs nearly as much.  Yes, the LED bulbs do cost more than other forms of light bulbs, but when you are only replacing bulbs every few years instead of every couple of months, the cost will be significantly lower.

Home owners need to consider using more LED lighting in their homes, but business owners should see LED as the only option.  Running a successful business is all about the bottom line, and looking for easy ways to save the most money is important, and LED lighting gives any company or shop the chance to bring more money in and throw less away when turning on their lights.

 


An Introduction to LED Rope Lighting

LED technology has enabled a number of innovations in lighting and illumination since its introduction the 1960s. Though initially available in a single color – red – LED lights are now available in almost every color imaginable. Though they were once used exclusively as indicator lights on things like control panels, or to indicate whether a device is on or off, LED lights are quickly becoming an alternative to fluorescent and incandescent lighting options for practical and accent purposes. In both residential and commercial contexts, LED lighting continues to play an increasingly important role in the provision of light.

One of the biggest advantages of LED lights is the variety of sizes that are available. Though originally available in a one-size-fits-all format – usually in the approximate 5 mm range – the range of LEDs that are available has greatly expanded. Today, LEDs can be found that range in size from approximately on par with the head of a pin, all the way up to a 1×1 mm panel. This allows the creation of a number of LED-based technologies that enhance the versatility, cost effectiveness, environmental friendliness, and long-term affordability of unique lighting solutions. For example: when it comes to mood and accent lighting, LED bulb is capable of adjusting intensity, light temperature, and even color in ways that are impossible with incandescent or fluorescent bulbs. In sign displays, LED diodes can outlast fluorescent tube lighting by many years, saving money in the long term. Plus, the number of possible color combinations that can be achieved with an LED screen is close to infinite, providing an unprecedented amount of flexibility.

One popular innovation that is made possible by LED lighting is LED rope lights. LED rope lights are flexible plastic cords – usually between .25 and .5 inches in diameter – that have wiring and LED diodes suspended within them. The cords are generally created using an extrusion process whereby a long wire of LED diodes is suspended in a flexible plastic. These are available in a variety of colors and lengths. Like Christmas lights, they can be chained together using a special coupler device that is usually included with the cord. When plugged in, the LEDs embedded in the plastic illuminate, creating an effect that is very similar to Christmas lights, but tends to radiate more brilliantly, as the plastic the diodes are embedded in acts in a manner similar to a fiber optic cable. As such, the entirety of the “rope” itself appears to be illuminated.

Some LED rope lights are configured such that the outside of the cord is completely translucent. The translucent plastic may also be tinted with nearly any color imaginable. These lights create the appearance of a rope with individual sparkles of light radiating from within. Some styles of rope lighting include various surface textures that affect the manner in which light diffuses from within. Other styles of rope light that are becoming increasingly popular include “neon” style LED rope lighting, which has a milky and opaque outer surface. When turned on, these rope lights create an effect similar to the uniform diffusion of light found in stretched neon bulbs.


Why LED light bulbs will take over the lighting industry

The LED – or Light Emitting Diode – is one of the greatest inventions of the 20th century, though it might not seem as significant as highly visible technologies such as cellular phones, or the Internet. Besides neon lights (which use gas that is excited by electrical current), the LED – first invented in 1962 – is the only light-emission technology that does not require the sort of easily exhaustible filament found in fluorescent and incandescent bulbs. Due to the LED diode’s design, the LED requires far less power than a traditional bulb to product an equivalent amount of light. The LED diode also lasts far longer than fluorescent or incandescent bulbs will. The LED, unlike the traditional bulb, is also not suspect to reduced life as a result of being turned on and off.

As LED diodes have evolved, their uses have changed considerably. Originally, LED bulbs came in one color – red – and provided a fairly low-intensity light. They were used exclusively as indicator lights on electronic panels and devices. As the technology improved, new colors became available, and the sizes of LED diodes became quite diverse. LED diodes were key to developing things as diverse as remote controls and electronic signboards. The LED became ubiquitous in technology products – providing everything from indicator lighting to backlighting. LEDs have been instrumental in exploiting the potential that is offered by Liquid Crystal Display (LCD) technology – allowing us conveniences such as internally illuminated, backlit alarm clocks, and night-friendly digital wristwatches. Today, LEDs provide backlighting in computer and television screens, and even are used in newer models of cars in instead of traditional bulbs in running lights, brake lights, turning signals, and caution lights.

The LED light bulb is a relatively recent innovation. Though LEDs can produce light far more efficiently than traditional light bulbs, the sort of LEDs that produce high-intensity light also happen to produce enough heat to damage themselves. As such, the possibility of LED light bulbs was limited by the ability of engineers to design a heat-sink system that adequately wicks heat way from the diode. This is not to say that LED bulbs create any additional heat compared to traditional lights. In fact, they tend to produce far less heat, in general; they just happen to require highly effective heat sinks, since the heat they generate is concentrated in such a small (almost always 1 x 1 mm or less) area.

LED light bulbs come in a variety of formats. They are often designed to fit into the same sockets that would usually hold a traditional bulb. As such, you can find LED bulbs that fit into both traditional bulb fixtures, as well as bulbs that emulate the tube-style fluorescent lighting that is often used in commercial environments. Most of these bulbs will use a combination of tiny LEDs in order to achieve the brightness and uniformity of light distribution that can be achieved with traditional bulbs. Though this may mean that the bulb looks strange when examined up close, the difference between LED-based bulbs and traditional bulbs is otherwise indiscernible.


How to use LED Flood Lights

Flood lights are an ubiquitous appearance in modern life. They are found on the sides of buildings, in parking lots, inside garages, outside homes, scattered throughout warehouses, and in a variety of commercial contexts. Two things about floodlights are absolutely certain: first, if they are located outdoors, they will definitely attract huge, unruly swarms of bugs. Thankfully, there are pest control solutions that can help with this, if it becomes a problem. Second is that they consume a lot of power. With traditional incandescent light bulbs, there is no solution to this issue. You either turn the bulb off, or keep it on and grudgingly put up with the amount of energy it consumes.

However, recent innovations in LED technology have made LED-based spotlight bulbs more feasible than ever. LED spotlight bulbs, on average, consume about 1/5 of the electricity that is needed to power a traditional spotlight bulb. They also tend to provide brighter light that approximates sunlight, rather than the yellow glow often associated with spotlights and other incandescent bulbs. Some LED spotlights even change color on-demand.

Some LED flood light solutions are custom-designed. These systems may involve a large bulb apparatus that approximates the appearance of a traditional spotlight bulb, or might have the capacity for individual LED panels to be swapped out within the light emitter. Some of these more specialized systems might not have the capacity to interface with traditionally-designed screw-in bulbs. More recent models of LED spotlight bulbs resemble traditional bulbs, in that they have a threaded, screw-in mounting system for securing them to the fixture and providing power. Though the shape of these bulbs resembles that of a traditional flood light, you might notice that the actual ‘light’ portion of it is only the small area in the center, while the rest of the ‘bulb’ is composed of a hollow set of radiating metal blades. These metal blades are a portion of what is known as a ‘heat sink’. This is a manner for the LED diodes and power converter – both of which become quite hot  – to passively vent their heat into the air that surrounds the bulb. Without the heat-sink system, the LEDs located inside the bulb would inevitably overheat and burn out – which is obviously undesirable. Hence making sure that the heat sink’s hollow areas are free of debris is an important factor in ensuring the longevity of LED-based flood lights. This doesn’t require much work – simply a blast of compressed air or a squirt of water from a hose should be sufficient if they appear blocked.

LED flood lights offer the same degree of visibility that traditional floodlights do, while saving money in long-term energy and replacement costs. They are available in a variety of wattages – all the way from tiny track-light floods, to high-powered outdoor floodlights. No matter what application you are using flood lights for, making the switch to LED flood lights can be a cost-effective move with added long-term benefits in terms of convenience and environmental friendliness.


LED Rope Light

If you want the perfect accent lighting for your home both inside or out or need to find a better solution to lighting up those dark areas in your home, then adding an LED rope light may be exactly what you need. With all the advantages of LED lighting, there is lighting option more efficient. LED lighting produces less heat, less energy, and give you all the color option you would ever want. A LED rope light is a string of lights that can be placed anywhere and the produce the perfect lighting to even the darkest and hardest to reach places.

Every home has that one area that seems very dark and gloomy, and whether it is in you main living area or outside your house, an LED rope light can help brighten up the space. Decks and railings can be very dangerous when not lit up properly, but who wants to leave their porch lights on all day? By adding an LED rope light you can make sure that the perfect level of brightness is available. LED rope lights can be used with timers and dimmers so the lights are only on when you want them to be and only as bright as you like. It is very useful to have the LED rope light come on right before you get home each day, but there are plenty of other ways and places to use them.

Many older homes seem to not have significant lighting in the kitchen. LED rope lights can be very easily added under cabinets to add additional lighting at a very low cost. The racks that hold up the lights come in many styles so you can add the perfect look to your kitchen.

If you are looking to remodel, then you may find rope LED rope lights very useful. Not only are they very affordable, but can be assemble very easily as well. They are great for accent lighting as well as cove lighting. More and more living room remodels are including a LED rope light to save on electricity without sacrificing function.

LED rope lights are not limited to just the inside of your home or the first few steps outside, but can be used anywhere around your home. Outside patio areas can be difficult to light because of their locations as well as the outside elements that they have to encounter. LED bulbs have no filaments in them meaning that they last for extreme amounts of time. You can place LED rope lights around the edge of your patio and not worry about the bulbs breaking.

They also make for some of the best holiday and celebration lighting for a few reasons. No t only can you find them in almost any color imaginable, but they are very low cost. You may want to include some outside your home for Christmas or in a banquet hall for a wedding or graduation party.

If you have not already, then it is time to start using the next generation of lighting with LED lights and there no easier or more efficient way to start then with a few wheels of LED rope lights.


LED Tail Lights

A fairly good number of automobile companies are adding LED tail Lights to the designs of their cars and for good reason. There are several advantages to using LED tail lights over the traditional incandescent tail lights that are found in most cars. LED lights have been added to many tools and technologies over the years, but having LED tail lights in the vehicle you drive could just save a life on the road.

The reason many technologies are now using LED light bulbs instead of the once standard light bulbs that could be found in everything, is because of how much quicker the LED bulbs light up and LED tail lights are no exception to this. If anyone has ever stopped abruptly in front of you while driving, you know how important tail lights are and how quick you must respond when the car’s tail lights in front of you light up. LED tail lights offer an advantage by lighting up .5 seconds faster, now .5 seconds may not seem like a long time, but it could be the factor in whether you hit the car or stop in time. It has been calculated that .5 seconds is equivalent to about one car length when driving the speed limit on the highway, meaning that you will have a full car length longer to stop once you see the tail lights come on.

If added safety on the busy highways that you are forced to travel is not enough, LED tail lights offer more advantages. LED lights last longer than other lights and are not fragile. If you have ever been pulled over for having a tail light out, you know how quick the bulb can go out, but with LED tail lights you have a warning before the light just dies. LED lights are constructed to begin dimming once their life is over instead of just burning out, but because of the much added time to the life of LED bulbs, more than likely your car will die before the LED tail lights stop working.

But more than just a great product for you and your car, LED tail lights are also a great product for the environment. Driving your car already releases enough carbon dioxide into the air, so why indirectly contribute even more every time you touch your brake. LED tail lights do not become hot or waste energy in the way that incandescent light bulbs do, so you won’t be replacing the bulbs as much. So why not do something good for the world when driving your car.

LED tail lights have soared in popularity because of their advantages over the incandescent light bulbs that all cars were once using. Not only do the LED taillights last longer, and are better for the environment, but they could very well save you from being in an accident one day. With all the advantages of LED tail lights, it seems silly to not have them in your car and more than likely one day LED tail lights will be the only tail lights that we see on the roads.